Attic Insulation Before & After Photos

In Saint-Constant, our client was dealing with a poorly insulated attic, resulting in drafts, uncomfortable temperature fluctuations, and high energy bills. After a thorough inspection, we completely caulked the air leaks around ducts, hatches, wiring, and recessed lighting fixtures, then installed TruSoft blown cellulose insulation with an R60 thermal value, adding radiant barriers and optimizing ventilation with baffles. These measures created a continuous thermal envelope, significantly reducing heat loss, improving indoor comfort and air quality, while enabling our client to achieve significant energy savings and prevent the risk of mold growth.

The problem

Mr. Simard contacted Systèmes Éconergie to properly insulate his attic. He had very high energy costs, as well as problems with an ice dam on the roof of his house in winter. Both of these problems are caused by the lack of insulation in his attic.

The solution

In order to solve Mr. Simard's problem, we removed the old fiberglass insulation, to seal all the air leaks in the attic (joints, ducts, etc.) and we blew a little more than 16’’ of cellulose fibers. With this solution, we achieve an R-61 value!

The problem:

Mr. Nasiri wants to re-insulate his attic. There is some insufficient air ventilation and an accumulation of humidity in the attic.

The solution:

Sealing and insulating the attic. Our team seals the air leaks present on the attic floor, clears the soffits, installs ventilation mats and blows in 16 inches of cellulose.

Our client in Anjou contacted us to inspect his attic insulation, which he felt was not performing as expected. Our specialist found insufficient insulation and air leaks, so we added more insulation and sealed all leaks. The completed work significantly reduces heating and cooling costs, prevents moisture build-up, and enhances energy efficiency.

The problem

Mold in the attic because of poor ventilation and low insulation.

The customer seeks to decontaminate the attic and reinsolate it.

The solution

Our team has removed existing mold in the attic thanks to our MoldX product. We then closed the air leaks on the attic floor and isolated the attic with Cellulose Fiber.